Screen Projection – Three Simple and Practical Methods to Teach You Computer Screen Projection TV
The simplest HDMI screen projection
1.Connect the computer and TV with an HDMI data cable
Computers and televisions need to be connected using an HDMI interface. If it’s not an old computer, it will have an HDMI interface. Just connect the corresponding HDMI interface between the computer and the television.
2.Set signal source
There are slight differences in the setting methods for different televisions. Generally, there is a signal source button on the remote control, which can be pressed once to switch the signal source. After connecting the computer and TV with an HDMI data cable, you can use the remote control to switch the signal source. Select the HDMI1 interface and insert the HDMI interface into the TV to project the computer screen onto the TV.
DLNA screen projection for Win7 and Win10 systems
If you don’t use HDMI projection or third-party projection software, you can only use the system’s built-in projection protocol
1.Win10 screen mirroring
The Win10 system has its own DLNA screen projection function, which only requires the computer and TV to be on the same LAN. When using it, select a video to play to the device. There is another simple method, which is the Windows Media Player software that comes with Win10. When you right-click on the mouse, select DLNA/WiDi to play, or you can project the computer screen onto the TV.
2.Win7 screen mirroring
The Win7 system’s screen mirroring is a bit more complex, and requires changes to the operating system to enable the media streaming function on the computer. These services are Windows Media Player Network Sharing Service, SSDP Discovery, and UPnP Device Host, which are all enabled by default.
The specific methods are as follows:
(1) Click the start button in the bottom left corner, run, enter services.msc, then start the Windows media player service, and then start SSDP Discovery and UPnP Device Host. The method is the same, all by entering the run command to open these services.
(2) In Computer Control Panel Network and Internet, click on Network and Sharing Center, open and change advanced sharing settings, then select “Streaming” to enable streaming services. Then set all states to on.
Third party screen casting software Bijie screen casting
1. Install the Bijie screen projection app on your computer and TV.
2. The computer and TV should be in the same WiFi environment.
3. Open the Bijie screen casting app on the TV, and the software interface will have a “screen casting code”.
4. Open the Bijie screen casting app on the computer, switch to the computer screen casting option, and then enter the casting code on the TV Bijie screen casting app to achieve screen casting.
