The steps to cast the Google Cast screen are as follows

Preparation

1. Equipment requirements：
   • Make sure that BJCast multimedia collaboration system devices, such as BJ66, support Google Cast functionality.
   • Make sure that the projection device (phone, tablet, or computer) supports the Google Cast protocol.
   • Make sure that the Bijie device and the projection device are connected to the same Wi-Fi network.
2. Network environment：
   • Make sure the Wi-Fi network is stable to avoid getting stuck or interruptions during screen projection.

Screen projection operation steps

1. Connect BJCast devices

• Connect a BJCast device (such as the BJ66) to the TV or projector via an HDMI cable, and make sure the device is turned on.
• Make sure the BJCast device is connected to the Wi-Fi network.

2. Turn on Google Cast

• In the main interface or settings of the BJCast device, locate and enable the Google Cast feature.
• Write down the name of the BJCast device (e.g. “BJ-Conference-Room”).

3. Operate on the screen projection device

• Phone/tablet (Android or iOS)：
  1. Open the Google Home app on your phone or tablet (requires advance installation).
     Make sure your phone or tablet is connected to the same Wi-Fi network as your BJCast device.
  2. In the Google Home App, click the “cast” icon in the upper right corner.
  3. In the device list, select the BJCast device (e.g. “BJ-Conference-Room”).
  4. After the screen projection is successful, the content on the mobile phone or tablet will be displayed on the TV or projector.
• Computer (Chrome browser)：
  1. Open Chrome browser and make sure your computer is connected to the same Wi-Fi network.
  2. Click the “More” menu (three dots) in the upper right corner of the browser and select “Projection”.
  3. In the device list, select the Bijie device (e.g. “BJ-Conference-Room”).
  4. Select the screen projection mode (e.g. “Full Screen” or “Single Tab”).
  5. After the screen projection is successful, the content of the computer screen or tab will be displayed on the TV or projector.

4. Start projection

• After the screen projection is successful, you can play videos, presentations or browse a web on your mobile phone, tablet or computer, and the content will be displayed on the TV or projector in real time.
• Play, pause, volume and other operations can be controlled on the screen projection device.

5. end projection

• In the Google Home App or Chrome browser, click “Stop Screen Casting” to disconnect.
• Or directly select “Disconnect Screen Projection” on the main interface of the Bijie device.