TV screen mirroring – why is there a delay in TV screen mirroring?
The reasons for delayed TV projection may include the following aspects:
- Unstable network environment: During the screen casting process, if the network environment is unstable, the data transmission speed will slow down, resulting in screen casting delay.
- Insufficient equipment performance: Some old or low performance devices may experience delays during screen mirroring due to limited data processing capabilities.
- Compatibility issues with screen casting software: Different brands and models of devices may have compatibility issues with screen casting software, resulting in delays during the screen casting process.
- The resolution of televisions and projection devices is different: this may result in inconsistent image processing speeds, leading to delays.
- Improper software settings or hardware incompatibility: This can also affect the smoothness of screen mirroring.
There are several ways to solve TV screen casting delay:
- Optimize network environment: Ensure stable network environment by upgrading broadband, closing applications that occupy network resources, attempting to connect to wired networks, and adjusting router positions to avoid signal interference.
- Improving device performance: If the device performance is low, you can consider upgrading the device or cleaning up system junk, closing bad applications to improve device performance.
- Update screen casting software: Ensure that the screen casting software is the latest version and check if there is a compatible version with the screen casting device.
- Check the connecting wires: If using wired screen mirroring, ensure that the connecting wires are not damaged or too long, as these factors may cause signal transmission delays.
- Adjust settings: Based on the actual situation of the device and software, adjust settings such as resolution and refresh rate to match the performance of both parties and reduce latency.
It should be noted that the above are only possible reasons and solutions, and specific operations need to be investigated and adjusted according to the actual situation of the equipment and software. If none of the above methods can solve the problem, it is recommended to contact the equipment manufacturer or professional maintenance personnel for assistance.