The Bijie Multimedia Collaboration System provides four sets of transmitter software for Android, iOS, MacOS, and Windows, supporting wireless screen mirroring by installing software clients on Windows, Mac, Android, and iOS devices.
Download the transmitting software on the PC client, enter the IP address, screen casting code, and device name of the receiving device as three options, and then you can achieve long-distance cross network segment screen casting. The principle of long-distance cross network segment screen casting is actually point-to-point screen casting. Firstly, the receiving device is found based on its IP address, and then connected to the device based on its name and screen casting code, avoiding the traditional requirement of casting screens in the same network segment.
The specific steps for using the client screen casting in the Bijie Multimedia Collaboration System may vary depending on the system version and device type. However, generally speaking, you can follow the following basic steps to operate:
- Connect the Bijie Multimedia Collaboration System to the large screen through an HDMI cable, and after plugging in the internet cable, the Bijie Multimedia Collaboration System can also be considered as entering the local area network;
- Open the ‘Screen Projection Code Mode’ settings – enable (4-digit screen projection code) – a 4-digit screen projection code will appear on the display screen.
- You can scan the QR code on your phone or enter the screen casting code to cast the screen;
- PC clients can use extended screen mirroring and program windows for screen mirroring; Client screen casting supports cross network segment screen casting;
Please note that the specific steps and interface may vary depending on the device and system. If you encounter any problems during the operation, it is recommended to refer to the user manual of the Bijie Multimedia Collaboration System or contact technical support for assistance.
In addition, to achieve the best screen casting effect, it is recommended to ensure that your device and network are in good condition, and to keep software and system updates. This can not only improve the success rate of screen casting, but also provide a better user experience.